Sifting - Sifter is highly suitable for laboratory work or where low throughput separation of dry particles is required

Search

Go

	Tel: (609) 914-0521 Fax: (609) 914-0318
	info@PowderTechUSA.com

Compact Design, Lightweight G308 Centrifugal Sifter
(PDF 1 MB)

Sieving/Sifting

G-308 SIFTER
	The Gericke G-308 Sifter is highly suitable for laboratory work or where low throughput separation of dry particles is required.
FEATURES Hinged and interlocked side access door Air purged double lip seals Quick release basket assembly Semi-quick release shaft assembly Shaft sleeve at both ends for quick assembly and to prevent premature seal failure Quick release door Easily removed and cleaned silicone gaskets Under slung belt drive for compact design No internal fasteners in product stream No special tools required for assembly, operation or maintenance

TYPICAL APPLICATIONS

Dressing to remove foreign particles
Classification to remove oversize particles
De-dusting to remove unwanted small particles
De-agglomeration to break down friable particles

Planning Drawings

GA-G308 Centrifugal Sifting Machine (Cast)	GSM 722 MK II With Hoppers and T-Bar Door
GA-G308 Centrif. Sifting Machine (Fabricated)	GA CSM 722 MK II With T-Bar Door and Elf Switches
GA - IG308 Sifter On Stand	GA CSM 722 In-Line Sifter w/Fines Hopper & Oversized Pot
CSM 722 MK II Sifter	CSM 1130 MK II Sifter
CSM 722 MK II With Hoppers	CSM 1130 MK II Sifter With Hoppers
G.A. CSM 722 Sifter Station	CSM 1542 MK II Sifter
CSM 722 MK II In Line Sifter	GA CSM 1542 MK II Sifter With T-Bar Door
CSM 722 MKII In Line Sifter (Vacuum)	GA CSM 1542 MK II Sifter With Hoppers
GA CSM 722 In Line Sifter With Hoppers	GA CSM 1542 MK II Twin Sifter

Case Studies | Application Questionnaire